No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MSTP Protection Function Configuration

Verifying the MSTP Protection Function Configuration

After Multiple Spanning Tree Protocol (MSTP) protection functions are configured, verify the configuration.


All configurations of MSTP protection functions are complete.


  • Run the display stp [ instance instance-id ] [ interface { interface-type interface-number } ] [ brief ] command to view spanning-tree status and statistics.


Run the display stp command, and you can view the Bridge Protocol Data Unit (BPDU) protection status and configured protection type on a switching device. For example:

<HUAWEI> display stp instance 0 interface gigabitethernet 1/0/0
-------[CIST Global Info][Mode MSTP]-------
CIST Bridge         :32768.00e0-fc0e-a421
Bridge Times        :Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC      :32768.00e0-fc0e-a421 / 0
CIST RegRoot/IRPC   :32768.00e0-fc0e-a421 / 0
CIST RootPortId     :0.0
BPDU-Protection     :enabled
TC or TCN received  :8
STP Converge Mode   :Fast
Share region-configuration :enabled
Time since last TC  :0 days 23h:9m:30s
 Port Protocol       :enabled
 Port Role           :CIST Designated Port
 Port Priority       :128
 Port Cost(Dot1T )   :Config=100 / Active=100
 Desg  Bridge/Port   :32768.00e0-fc0e-a421 / 128.1229
 Port Edged          :Config=disabled / Active=disabled
 Point-to-point      :Config=auto / Active=true
 Transit Limit       :3 packets/hello-time
 Protection Type     :Root
 Port Stp Mode       :MSTP
 Port Protocol Type  :Config=auto / Active= dot1s
 BPDU Encapsulation  :Config=stp / Active=stp
 PortTimes           :Hello 2s MaxAge 20s FwDly 15s RemHop 0
 BPDU Sent           :43
          TCN: 0, Config: 0, RST: 0, MST: 43
 BPDU Received       :3
          TCN: 0, Config: 0, RST: 0, MST: 3    
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 27320

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next