No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Transparent Transmission of Link-Layer-Protocol Packets On VPLS Networks

Configuring Transparent Transmission of Link-Layer-Protocol Packets On VPLS Networks

This section describes how to transparently transmit untagged link-layer-protocol packets, such as LACP, LLDP, BPDU, CDP, and UDLD packets, on VPLS networks.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number.sub-number

    The sub-interface view of the AC interface is displayed.

  3. Run link-protocol transport { lacp | lldp | bpdu | cdp | udld }

    Types of link-layer-protocol packets that can be transparently transmitted through the sub-interface are configured.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 27254

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next