No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - Security Hardening 01

This is ME60 V800R010C10SPC500 Configuration Guide - Security Hardening
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Physical and Environmental Security

Physical and Environmental Security

Physical and environmental access control is essential to ME device security protection. The following measures must be considered when physical and environmental security hardening is performed:

  • Formulate physical and environmental security policies and standardize the access, reception, operation, and record processes.
  • Arrange special security personnel for important areas.
  • Record information about exit and entry of the equipment room area.
  • For important equipment rooms, install double-layered doors, divide a neutral area between two doors, and provide video monitoring (to prevent unauthorized persons from following authorized persons into equipment rooms).
  • Deploy an access control system, which provides password cards or biological authentication methods (for example, authentication by fingerprint and iris) for persons with access authorities.
  • Deploy a video monitoring system.
  • Configure lock protection for cabinet doors and ensure that the doors are closed when cabinets are not used.
  • Install filler panels on unused slots of subracks.
  • Check for exposed serial interfaces and network interfaces on cabinets.
  • Configure unused physical ports to be disabled by default. Unused physical ports cannot communicate even when network cables are connected.
  • Perform identity-based authentication on the keyboard, video, and mouse (KVM) when the KVM virtual connection environment exists.
  • Perform disaster recovery remotely for important systems.
  • Ensure power supply backup and continuous power supply.
  • Monitor and control the equipment room temperature and humidity.
Updated: 2019-01-04

Document ID: EDOC1100059445

Views: 7594

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next