No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - Security Hardening 01

This is ME60 V800R010C10SPC500 Configuration Guide - Security Hardening

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Layer 2 Multicast

Layer 2 Multicast

In Layer 2 multicast, group policies can be set to restrict the access of multicast groups (multicast source groups) to a VLAN or an interface.

In Layer 2 multicast, IP policies can be set based on the source IP address to restrict the access of source IP addresses to a VLAN or VSI. Here the source IP address refers to the one carried in the IP header, that is, the host IP address.

In Layer 2 multicast, you can configure router ports not to be learned through packets.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059445

Views: 9153

Downloads: 12

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next