No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - IP Multicast 01

This is ME60 V800R010C10SPC500 Feature Description - IP Multicast

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multicast Program Leave

Multicast Program Leave

To leave a multicast program, a users sends to an IGMP-capable BRAS an IGMP Leave message. Figure 10-4 illustrates the process of the multicast program leave. The key actions during this process are described in Table 10-5.

NOTE:

Session-based multicast replication is used in the following illustration of the multicast program leave process. Multicast program leave processes of other multicast replication modes are similar to that of session-based multicast replication.

Figure 10-4 Multicast program leave process
Table 10-5 Key actions in each multicast program leave step

Step

Device

Key Action

STB

To leave a multicast program, an STB user sends to an IGMP-capable BRAS an IGMP Leave message. Upon receipt of the message, the BRAS identifies the user and the multicast program that the user wants to leave.

BRAS

The BRAS sends an IGMP Query message to members in the multicast group specified in the IGMP Leave message it received. (If IGMP Prompt-Leave is configured, this step is skipped.)

BRAS

The BRAS deletes the multicast forwarding entry of the STB user only if there are other members in the same multicast group. (If IGMP Prompt-Leave is configured, this step is skipped.)

NOTE:
If the STB user is not a member of any multicast group, the BRAS stops sending IGMP Query messages to the STB user after the robustness variable value is reached.

BRAS

The BRAS stops sending to the STB the multicast traffic of the corresponding multicast group it joined.

BRAS

If there is no member in the multicast group after the STB user leaves, the BRAS sends a PIM Graft message to the RP or source's DR to stop the multicast traffic replication to the group.

RP/source's DR

The RP or source's DR stops the replication of multicast traffic to the BRAS, ending the STB user leave process.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059456

Views: 13975

Downloads: 13

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next