No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - IP Multicast 01

This is ME60 V800R010C10SPC500 Feature Description - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP Static-Group Join

IGMP Static-Group Join

Static-group is implemented by statically joining interfaces to groups. For example, on the network shown in Figure 3-7, after an interface on ME device A is added to a static group, ME device A will not start a timer for the multicast entry that contains the specified group address, and the multicast entry will never expire. Therefore, ME device A sends multicast data to User 1 in the static group, irrespective of whether this user is requesting the data. This entry cannot be automatically deleted, but can only be manually deleted when it is not needed any more.

Figure 3-7 Static-group application

In real-world situations, static-group is configured on the ME device interface that is connected to hosts, which facilitates multicast data forwarding to the ME device. The ME device interface can then quickly forward the multicast data, which shortens the channel switchover period.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059456

Views: 10684

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next