No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - MPLS 01

This is ME60 V800R010C10SPC500 Feature Description - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP MTU

LDP MTU

The maximum transmission unit (MTU) defines the maximum number of bytes that a device can transmit at a time. It plays an important role when two devices communicate on a network. If the MTU exceeds the maximum number of bytes supported by a receive end or a transit device, packets are fragmented or even discarded, which imposes heavy burden on network transmission. Devices must calculate MTUs before communicating so that the sent packets can successfully reach receive ends.

LDP MTU Principles

LDP LSP forwarding differs greatly from IP forwarding in terms of implementation mechanisms, but they share a large number of similarities regarding the MTU principles. Both the LDP MTU and IP MTU are used so that packets pass through each transit device smoothly and reach receivers without fragmentation or reassembly.

An LSR selects the smallest value as the LDP MTU among MTUs advertised by all preferred next hops and the MTU of the local outbound interface. The LSR then sends upstream LSRs through Label Mapping messages carrying the MTU TLV representing the calculated LDP MTU. If any MTU changes due to the local outbound interface change or configuration change, the LSR recalculates the MTU and sends Label Mapping messages carrying the calculated MTU to all upstream LSRs.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059460

Views: 8059

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next