No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - MPLS 01

This is ME60 V800R010C10SPC500 Feature Description - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS-based VPN

MPLS-based VPN

A traditional virtual private network (VPN) transmits private network data over a public network using tunneling protocols, such as the Generic Routing Encapsulation (GRE), Layer 2 Tunneling Protocol (L2TP), and Point to Point Tunneling Protocol (PPTP).

An MPLS-based VPN, which is as secure as Frame Relay networks, does not encapsulate or encrypt packets; therefore, IP Security (IPsec), GRE, or L2TP tunnels do not need to be deployed. The MPLS-based VPN helps minimize the network delay time.

The MPLS-based VPN connect different branches of the private network through LSPs to form a unified network, as shown in Figure 1.The MPLS-based VPN also support interworking between different VPNs.

Figure 2-12 illustrates an MPLS-based VPN. The following devices are deployed on the MPLS-based VPN:

  • Customer edge (CE): an edge device on a customer network. The CE can be a router, switch, or host.

  • Provider edge (PE): an edge device on a service provider network.

  • Provider (P): is a backbone device in the service provider network and does not connect to CEs directly. A P device obtains basic MPLS forwarding capabilities but does not maintain VPN information.
Figure 2-12 MPLS-based VPN

The principles of an MPLS-based VPN are as follows:

  • PEs manage VPN users, establish LSPs between themselves, and advertise routes to VPN sites.

  • LDP or MP-BGP is used to allocate routes.

  • The MPLS-based VPN supports IP address multiplexing between sites and the interconnection of VPNs.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059460

Views: 7189

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next