No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CUSP-based Port Information Reporting

CUSP-based Port Information Reporting

CUSP allows a forwarder to report its port information to a controller through a control channel.

In Figure 20-3, after a control channel is established, the controller proactively queries port information from the forwarder. To achieve this, the controller sends a Multipart Request packet to query the port information of the forwarder. Upon receipt of the packet, the forwarder returns Multipart Reply packets to bulk report port information. If there are port changes, such as port status changes, the forwarder proactively sends Port Status packets to notify the controller of the changes.

Figure 20-3 Flowchart for reporting port information

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10477

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next