No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Principle of G.8275.1 Synchronization

Principle of G.8275.1 Synchronization

The principle of G.8275.1 time synchronization is the same as the principle of the IEEE 1588v2. The master and slave nodes send and receive timing messages of each other. According to the receiving and sending timestamps in the timing messages, the total delay in bidirectional transmission between nodes can be calculated. If the bidirectional delays are the same, the total delay divided 2 is equal to the unidirectional delay, which is the time difference between the slave node and the master node. Then, the slave node corrects the local time according to the time difference. In this manner, the slave node is synchronized with the master node.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10166

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next