No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OPS Architecture

OPS Architecture

Figure 19-1 shows the OPS architecture. The OPS is developed based on the Huawei proprietary Versatile Routing Platform (VRP) and allows customized applications to interwork with the modules on the management, control, and resource planes on the VRP through open application programming interfaces (APIs).

Figure 19-1 OPS architecture

Module Name Description

Open Programmability System.


Programming languages for applications supported by the OPS. The OPS supports all four types of programming languages.


OPS application programming interface through which the applications in the OPS can interwork with the modules on the VRP.


Operating system used by Huawei data communication devices. The VRP provides unified user and management interfaces that utilize a unified real-time operating system kernel, software-based IP forwarding engine, and route processing and configuration management plane. The VRP supports control plane functions and defines the interface standards on the forwarding plane.

Management plane

The management plane performs management functions for the entire system. It also provides coordination between all the planes, such as the PM and FM.

Control plane

The control plane performs call control and connection control functions. The control plane uses signaling to set up and release connections, and can restore a connection in case of a failure.

The control plane also performs other functions in support of call and connection control, such as routing information dissemination, L2VPN, L3VPN, OSPF, BGP, and MPLS.

Data plane

The data plane provides virtual network paths, such as the FIB and LSP, to transmit data between nodes.

Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10321

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next