No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LLDP Applications in Single Neighbor Networking

LLDP Applications in Single Neighbor Networking

Networking Description

In single neighbor networking, no interfaces between devices or interfaces between devices and media endpoints (MEs) are directly connected to intermediate devices. Each device interface is connected only to one remote neighboring device. In the single neighbor networking shown in Figure 11-5, Device B is directly connected to Device A and the ME, and each interface of Device A and Device B is connected only to a single remote neighboring device.

Figure 11-5 Single neighbor networking

Feature Deployment

After LLDP is configured on Device A and Device B, an administrator can use the NMS to obtain Layer 2 configuration information about these devices, collect detailed network topology information, and determine whether a configuration conflict exists. LLDP helps make network communications more secure and stable.

Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10402

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next