No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintenance Assistant Applications

Maintenance Assistant Applications

Automatic Health Check

During conventional device health check, you need to log in to a device and run commands to check the hardware and service running status.

The maintenance assistant function can be configured on a device to implement automatic health check, as shown in Figure 19-2. The device then automatically runs the health check commands, periodically collects health check results, and sends the results to a TFTP or FTP server for analysis. This function reduces maintenance workload. If a fault occurs, the system runs the pre-configured commands or scripts to isolate the faulty module and rectify the faulty.

Figure 19-2 Device automatically collects health information and sends it to a TFTP/FTP server
Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10267

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next