No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NTP Access Control

NTP Access Control

Access Control

The NTP is designed to handle accidental or malicious data modification or destruction. These problems typically do not result in timekeeping errors on other time servers in the synchronization subnet. The success of this design is, however, based on the redundant time servers and various network paths. It is also assumed that data modification or destruction does not occur simultaneously on many time servers over the synchronization subnet. To prevent subnet vulnerability, select trusted time servers and allow them to be the clock sources.

Access Control Implementation on the ME60

NTP provides two security mechanisms: access authority and NTP authentication.

  • Access authority

    Access control protects a local NTP service by setting the access authority. This is a simple measure to ensure security.

  • NTP authentication

    Enable NTP authentication on networks that demand high security.

Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 10476

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next