No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - System Management 01

This is ME60 V800R010C10SPC500 Feature Description - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Service Differentiation and Isolation

Service Differentiation and Isolation

Services deployed on a traditional ME device must be sent to the master main board (MMB) for processing and forwarding. If a fault occurs during service processing, the ME device will be most likely to fail, and other services cannot be processed. This failure can significantly impact user services. The virtual system (VS) technique can be used to differentiate and isolate services. After VSs are applied on a router, if a fault occurs on a VS, other services transmitted on other VSs are not affected. This mechanism improves network security.

In Figure 2-4, a physical system (PS) is partitioned into VSs to carry various types of services. Video, voice, and data services run on three independent VSs.

Figure 2-4 Service differentiation and isolation

Updated: 2019-01-04

Document ID: EDOC1100059466

Views: 11606

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next