No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


IPv4 Static Routes

The ME60 supports common static routes and the static routes associated with VPN instances. The static routes associated with VPN instances are used to manage VPN routes. For details about VPN instances, see the HUAWEI ME60 Multiservice Control Gateway Feature Description - VPN.

Attributes and Functions of IPv6 Static Routes

Similar to IPv4 static routes, IPv6 static routes are configured by the administrator and are applicable to simple IPv6 networks.

The major difference between IPv6 static routes and IPv4 static routes lies in their destination addresses and next hop addresses.

An IPv6 static route with destination address ::/0 ( mask length 0) is a default IPv6 route. If the destination address of an IPv6 packet fails to match any entry in the routing table, a router selects the default IPv6 route to forward the IPv6 packet.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14339

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next