No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multi-Process and Multi-Instance

Multi-Process and Multi-Instance

RIPng supports multi-process and multi-instance, which simplifies network management and improves service control efficiency. Multi-process allows a set of interfaces to be associated with a specific RIPng process, which ensures that the specific RIPng process performs all the protocol operations only on this set of interfaces. Therefore, multiple RIPng processes can run on one router, and each process manages a unique set of interfaces. In addition, the routing data of each RIPng process is independent; however, processes can import routes from each other.

On routers that support VPN, each RIPng process is associated with a specific VPN instance. Therefore, all the interfaces associated with the RIPng process need to be associated with the RIPng process-related VPN instance.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 17739

Downloads: 10

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next