No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of RIP

Overview of RIP


Routing Information Protocol (RIP) is a simple Interior Gateway Protocol (IGP). RIP is used in small-scale networks, such as campus networks and simple regional networks.

As a distance-vector routing protocol, RIP exchanges routing information through User Datagram Protocol (UDP) packets with port number 520.

RIP employs the hop count as the metric to measure the distance to the destination. In RIP, by default, the number of hops from the ME device to its directly connected network is 0; the number of hops from the ME device to a network that is reachable through another ME device is 1, and so on. The hop count (the metric) equals the number of ME devices along the path from the local network to the destination network. To speed up route convergence, RIP defines the hop count as an integer that ranges from 0 to 15. A hop count that is equal to or greater than 16 is classified as infinite, indicating that the destination network or host is unreachable. Due to the hop limit, RIP is not applicable to large-scale networks.

RIP has two versions:

  • RIP version 1 (RIP-1), a classful routing protocol

  • RIP version 2 (RIP-2), a classless routing protocol

RIP supports split horizon, poison reverse, and triggered update, which improves the performance and prevents routing loops.


As the earliest IGP, RIP is used in small and medium-sized networks. Its implementation is simple, and the configuration and maintenance of RIP are easier than those of Open Shortest Path First (OSPF) and Intermediate System-to-Intermediate System (IS-IS). Therefore, RIP is widely used on live networks.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14343

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next