No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Route

Default Route

Default routes are special routes. In most cases, they are configured by administrators. Default routes can also be generated by dynamic routing protocols, such as OSPF and IS-IS.

Default routes are used only when no matching routing entry is available for packet forwarding in the routing table. A default route in the routing table is the route to the network 0.0.0.0 (with mask 0.0.0.0). You can check whether the default route is configured using the display ip routing-table command.

If the destination address of a packet does not match any entry in the routing table, the packet is sent along a default route. If no default route exists and the destination address of the packet does not match any entry in the routing table, the packet is discarded. An Internet Control Message Protocol (ICMP) packet is then sent, informing the originating host that the destination host or network is unreachable.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 16153

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next