No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding RIP

Understanding RIP

RIP is a distance-vector routing protocol. It forwards packets through UDP and uses timers to control the advertisement, update, and aging of routing information. However, design defects in RIP may cause routing loops. Therefore, split horizon, poison reverse, and triggered update were introduced into RIP to avoid routing loops.

In addition, RIP periodically advertises its routing table to neighbors, and route summarization was introduced to reduce the size of the routing table.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 20926

Downloads: 10

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next