No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Classification of Dynamic Routing Protocols

Classification of Dynamic Routing Protocols

Dynamic routing protocols can be classified based on the following criteria.

Based on the Application Scope

Based on the application scope, routing protocol types can be defined as follows:

  • Interior Gateway Protocol (IGP): runs within an Autonomous System (AS), such as RIP, OSPF, and IS-IS.

  • Exterior Gateway Protocol (EGP): runs between ASs. At present, BGP is the most widely used EGP.

Based on the Routing Algorithm

Based on the routing algorithm, routing protocol types can be defined as follows:

  • Distance-vector routing protocol: includes RIP and BGP. BGP is also called a path-vector protocol.

  • Link-state routing protocol: includes OSPF and IS-IS.

These routing algorithms differ in their methods of discovering and calculating routes.

Based on the Destination Address Type

Based on the destination address type, routing protocol types can be defined as follows:

  • Unicast routing protocol: includes RIP, OSPF, BGP, and IS-IS.

  • Multicast routing protocol: includes Protocol Independent Multicast-Sparse Mode (PIM-SM).

This chapter describes unicast routing protocols only. For details on multicast routing protocols, see the HUAWEI ME60 Multiservice Control Gateway Feature Description - IP Multicast.

Routers manage both static and dynamic routes. These routes can be exchanged between different routing protocols to implement readvertisement of routing information.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14322

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next