No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of OSPFv3

Overview of OSPFv3


Open Shortest Path First (OSPF), developed by the Internet Engineering Task Force (IETF), is a link-state Interior Gateway Protocol (IGP).

At present, OSPF Version 2 (OSPFv2) is used for IPv4, whereas OSPF Version 3 (OSPFv3), developed on the basis of OSPFv2, is used for IPv6.


The primary purpose of OSPFv3 is to develop a routing protocol independent of any specific network layer. The internal OSPFv3 router information is redesigned to achieve this purpose.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 15607

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next