No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


RIP version 2 (RIP-2) is a classless routing protocol. Figure 4-2 shows the format of a RIP-2 packet.

Figure 4-2 RIP-2 packet format

Compared with RIP-1, RIP-2 has the following advantages:

  • Supports external route tags and uses a routing policy to flexibly control routes based on the tag.

  • Supports route summarization and classless inter-domain routing (CIDR) by adding mask information to RIP-2 packets.

  • Supports next hop specification so that the optimal next hop address can be specified on the broadcast network.

  • Supports Update packets transmission along multicast routes. Only the ME devices that support RIP-2 can receive RIP-2 packets, which reduces resource consumption.

  • Provides two packet authentication modes: simple authentication and Message Digest 5 (MD5) authentication, which improves security.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14420

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next