No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Center Applications of Association Between Direct Routes and a VRRP Backup Group

Data Center Applications of Association Between Direct Routes and a VRRP Backup Group

Service Overview

A data center, used for service access and transmission, consists of many servers, disk arrays, security devices, and network devices that store and process a great number of services and applications. Firewalls are used to improve data security, and VRRP backup groups are configured to improve communication reliability. VRRP may cause user-to-network traffic and network-to-user traffic to travel along different paths, and as a result, the firewall may discard the network-to-user traffic because of path inconsistency. To address this problem, association between direct routes and a VRRP backup group must be configured.

Networking Description

Figure 2-15 shows a data center network. A server functions as a core service module in the data center. A VRRP backup group protects data exchanged between the server and core devices, improving service security. Firewalls are attached to devices in the VRRP backup group to improve network security.

Figure 2-15 Data center network

Feature Deployment

The master device transmits server traffic to a core device. When the core device attempts to send traffic to the server, the traffic can only pass through a firewall attached to the master device. On the network shown in Figure 2-15, the server sends data destined for the core device through the master device, and the core device sends data destined for the server along a path that an Interior Gateway Protocol (IGP) selects. The association between the direct routes and a VRRP backup group can be configured on switch A and switch B so that the IGP selects a route based on VRRP status. The IGP forwards core-device-to-server traffic over the same path as the one over which server-to-core-device traffic is transmitted, which prevents the firewall from discarding traffic.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 15955

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next