No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


RIP version 1 (RIP-1) is a classful routing protocol, which supports only the broadcast of protocol packets. Figure 4-1 shows the format of a RIP-1 packet. A RIP packet can carry a maximum of 25 routing entries. RIP is based on UDP, and a RIP-1 packet cannot be longer than 512 bytes. RIP-1 packets do not carry any mask information, and RIP-1 can identify only the routes to natural network segments, such as Class A, Class B, and Class C. Therefore, RIP-1 does not support route summarization or discontinuous subnets.

Figure 4-1 RIP-1 packet format

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14515

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next