No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF GTSM

OSPF GTSM

In Figure 6-47, OSPF runs between the ME devices, and GTSM is enabled on Device C. The following are the valid TTL ranges of the packets from all other ME devices on the network to Device C:

  • Device A and Device E are the neighbors of Device C, and the valid TTL range of packets from Device A and Device E is [255 - hop count + 1, 255].

  • The valid TTL ranges of the packets from Device B, Device D, and Device F to Device C are [254, 255], [253, 255], and [252, 255], respectively.

Figure 6-47 Networking for OSPF GTSM

NOTE:

For detailed description of OSPF GTSM, refer to the HUAWEI ME60 Feature Description - Security.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14620

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next