No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP ORF

BGP ORF

Outbound Route Filtering (ORF) is used to enable a BGP device to send the local routing policy to its BGP peer. The peer can use the local routing policy to filter out unwanted routes before route advertisement.

In most cases, users expect the carrier to send them only the routes they require. Therefore, the carrier needs to maintain a separate outbound policy for each user. ORF allows carriers to send only required routes to each user without maintaining a separate outbound policy for each user. ORF supports on-demand route advertisement, which greatly reduces bandwidth consumption and the manual configuration workload.

Prefix-based ORF, defined in standard protocols, can be used to send prefix-based inbound policies configured by users to a carrier through Route-Refresh packets. The carrier then filters out unwanted routes before route advertisement based on the received inbound policies, which prevents users from receiving a large number of unwanted routes and saves resources.

Applications

On the network shown in Figure 9-25, Device A and Device B are directly connected, and prefix-based ORF is enabled on them; after negotiating the prefix-based ORF capability with Device B, Device A adds the local prefix-based inbound policy to a Route-Refresh packet and then sends the Route-Refresh packet to Device B. Device B uses the information in the packet to work out an outbound policy to advertise routes to Device A.

Figure 9-25 Applying ORF to directly connected BGP peers

As shown in Figure 9-26, Device A and Device B are clients of the RR in the domain. Prefix-based ORF is enabled on all three NEs. After negotiating prefix-based ORF with the RR, Device A and Device B add the local prefix-based inbound policies Route-Refresh packets and then send the packets to the RR. Based on the Route-Refresh packets, the RR uses the information in the Route-Refresh packets to work out the outbound policies to reflect routes to Device A and Device B.

Figure 9-26 Applying ORF to a domain with an RR

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14772

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next