No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multi-Process and Multi-Instance

Multi-Process and Multi-Instance

RIP supports multi-process and multi-instance to simplify network management and improve service control efficiency. Multi-process allows a set of interfaces to be associated with a specific RIP process, which ensures that the specific RIP process performs all the protocol operations only on this set of interfaces. Therefore, multiple RIP processes can run on one ME device, and each process manages a unique set of interfaces. In addition, the routing data of each RIP process is independent; however, processes can import routes from each other.

On ME devices that support VPN, each RIP process is associated with a specific VPN instance. Therefore, all the interfaces associated with the RIP process need to be associated with the RIP process-related VPN instance.

Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 14399

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next