No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Feature Description - WAN Access 01

This is ME60 V800R010C10SPC500 Feature Description - WAN Access

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Static and Dynamic Routes

Static and Dynamic Routes

Static routes can be easily configured and have low requirements on the system. They apply to simple, stable, and small-scale networks. However, they cannot automatically adapt to network topology changes. Therefore, static routes require subsequent maintenance.

Dynamic routing protocols have their routing algorithms and can automatically adapt to network topology changes. They apply to the network equipped with a number of Layer 3 devices. Dynamic route configurations are complex. Dynamic routes have higher requirements on a system than static ones do and consume network resources.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059473

Views: 17544

Downloads: 10

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next