No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Hardware Description

This is ME60 V800R010C10SPC500 Hardware Description
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
100Gbps Switch Fabric Unit E(SFUI-100-E)

100Gbps Switch Fabric Unit E(SFUI-100-E)

Overview

Table 10-112 Board attributes

Attribute

Description

Board name silkscreen

SFUI-100-E

Description

100Gbps Switch Fabric Unit E(SFUI-100-E)

BOM

03054900

Model

ME0DSFUIE07D

Table 10-113 Mapping products and versions

Product

Minimum Version Requirement

ME60-X16

V800R008C10

Appearance



Panel

Table 10-114 Buttons

Name

Description

OFL

Before removing a board, press and hold the OFL button for about 6 seconds until the OFL indicator turns on. Then, you can remove the board.

Table 10-115 Indicators

Name

Description

RUN

Before the board is powered on and registers, this indicator blinks slowly (2 Hz).

After the board is powered on and registers, if this indicator blinks at 0.5 Hz, the system is working properly.

ACT

If this indicator is steady green, the board is working properly; if this indicator is off, the board is faulty.

OFL

When the board is working properly, the OFL red indicator is off. After the OFL button is pressed to power off the board, the OFL red indicator is on.

Functional Specifications

Table 10-116 Functions and features

Functions and Features

Remarks

Reliability and availability

The 3+1 backup mode is used. The four SFUs balance services at the same time. If one SFU is faulty or replaced, the other three SFUs automatically take over its services to prevent service interruptions.

Technical Specifications

Table 10-117 Board specifications

Item

Specification

Dimensions (H x W x D)

40.1 mm x 411 mm x 535.6 mm (1.58 in. x 16.18 in. x 21.09 in.)

Typical power consumption

90.0 W

Typical heat dissipation

292.0 BTU/hour

Weight

4.3 kg (9.48 lb)

Ambient temperature

Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059474

Views: 25729

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next