No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Hardware Description

This is ME60 V800R010C10SPC500 Hardware Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
1Tbps Switch Fabric Unit C(SFUI-1T-C)

1Tbps Switch Fabric Unit C(SFUI-1T-C)

Overview

Table 10-100 Board attributes

Attribute

Description

Board name silkscreen

SFUI-1T-C

Description

1Tbps Switch Fabric Unit C(SFUI-1T-C)

BOM

03056513

Model

ME0DSFUIU07C

Table 10-101 Mapping products and versions

Product

Minimum Version Requirement

ME60-X8A

V800R008C10

Appearance



Panel

Table 10-102 Buttons

Name

Description

OFL

Before removing a board, press and hold the OFL button for about 6 seconds until the OFL indicator turns on. Then, you can remove the board.

Table 10-103 Indicators

Name

Description

RUN

Before the board registration: The green indicator blinks twice every second (2 Hz).

After the registration of the board: If the green indicator blinks once every two seconds (0.5 Hz), the system is working properly.

OFL

If the red indicator is off, the board is working properly. If the red indicator is on, the board is powered off.

Functional Specifications

Table 10-104 Functions and features

Functions and Features

Remarks

Reliability and availability

The 3+1 backup mode is used. The four SFUs balance services at the same time (Two SFUs integrate on two MPUs). If one SFU is faulty or replaced, the other three SFUs automatically take over its services to prevent service interruptions.

Technical Specifications

Table 10-105 Board specifications

Item

Specification

Dimensions (H x W x D)

24.9 mm x 386.8 mm x 534.3 mm (0.98 in. x 15.23 in. x 21.04 in.)

Typical power consumption

160.0 W

Typical heat dissipation

519.1 BTU/hour

Weight

5.0 kg (11.03 lb)

Ambient temperature

Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059474

Views: 25287

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next