No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Hardware Description

This is ME60 V800R010C10SPC500 Hardware Description
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
4-Port 100GBase-CFP2 Broadband Service Unit Integrated(BSUI-400)

4-Port 100GBase-CFP2 Broadband Service Unit Integrated(BSUI-400)

Overview

Table 10-493 Board attributes

Attribute

Description

Board name silkscreen

BSUI-400
4x100GBase-CFP2

Description

4-Port 100GBase-CFP2 Broadband Service Unit Integrated(BSUI-400)

BOM

03057958

Model

ME0D0L4NCB71

Table 10-494 Mapping products and versions

Product

Minimum Version Requirement

ME60-X8A

V800R010C00

ME60-X16A

V800R010C00

Appearance



Panel

Table 10-495 Buttons

Name

Description

OFL

Board removal button. To remove a board, hold down the OFL button for about 6s until the OFL indicator turns on, and then remove the board.

Breakout

When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Table 10-496 Indicators

Name

Description

OFL (red)

If the indicator is steady on, the board can be removed.

L/A (green)

If the indicator is steady on, the link is Up. If this indicator blinks, data is being transmitted or received. If the indicator is off, the link is Down.

RUN (green)

If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks twice every second (2 Hz), the board is starting and has not completed registration.

0 to 9 100GE Breakout (green)

Breakout 0-9: breakout indicator. If breakout indicator X is on, the interface indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, interface indicators are showing the running status of breakout channel 0 (if an interface indicator is blinking, breakout channel 0 on this interface is receiving and transmitting data); if breakout indicator 1 is on, interface indicators are showing the running status of breakout channel 1.

If the board has breakout interfaces, each breakout indicator for channels 0 to 9 turns on for 5s in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each interface, press the Breakout button to have breakout indicator 1 turns on.

Table 10-497 Service interfaces

Interface Name

Interface Type

Connector Type

Description

Cable

0/0 to 0/1

1/0 to 1/1

10G LAN/WAN or 100GE

CFP2

Interface for inputting and outputting 10G LAN/WAN or 100GE optical signals

Optical fiber

Functional Specifications

Table 10-498 Functions and features

Functions and Features

Remarks

Line-Rate capability

Provides four 100G line-rate forwarding interfaces to support 400G line-rate forwarding.

Whether interface splitting is supported

Yes

To enable interface splitting, run the port split command to complete interface splitting configuration.

Reliability and availability

Hot swappable.

Restrictions and remarks

The interfaces working in WAN mode can function only as master interfaces.

Technical Specifications

Table 10-499 Interface specifications

Attribute

Description

Optical type supported

100Gbps CFP2 optical module

NOTE:

When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported.

Modules with the BOM number 02312AXE are not supported.

Working mode

Full-duplex

Compliant standard

IEEE 802.3

Frame format

Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Table 10-500 Board specifications

Item

Specification

Dimensions (H x W x D)

40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.)

Typical power consumption

468.0 W

Typical heat dissipation

1820.1 BTU/hour

Weight

10.0 kg (22.05 lb)

Ambient temperature

Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059474

Views: 25969

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next