No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Hardware Description

This is ME60 V800R010C10SPC500 Hardware Description
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
2-Port 100GBase-CFP2 Flexible Card(BP480)

2-Port 100GBase-CFP2 Flexible Card(BP480)

Overview

Table 10-539 Board attributes

Attribute

Description

Board name silkscreen

BP480-2x100GBase-CFP2-A

Description

2-Port 100GBase-CFP2 Flexible Card(BP480)

BOM

03032UAH

Model

ME0M0E2NCB72

Appearance



Panel

Table 10-541 Buttons

Name

Description

Breakout

When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Table 10-542 Indicators

Name

Description

STATUS (green)

If the indicator is steady on, the link is Up. If this indicator blinks, data is being transmitted or received. If the indicator is off, the link is Down.

L/A (green)

If the indicator is steady on, the link is Up. If this indicator blinks, data is being transmitted or received. If the indicator is off, the link is Down.

0 to 9 100GE Breakout (green)

Breakout 0-9: breakout indicator. If breakout indicator X is on, the interface indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, interface indicators are showing the running status of breakout channel 0 (if an interface indicator is blinking, breakout channel 0 on this interface is receiving and transmitting data); if breakout indicator 1 is on, interface indicators are showing the running status of breakout channel 1.

If the board has breakout interfaces, each breakout indicator for channels 0 to 9 turns on for 5s in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each interface, press the Breakout button to have breakout indicator 1 turns on.

Table 10-543 Service interfaces

Interface Name

Interface Type

Connector Type

Description

Cable

0 to 1

10G LAN/WAN or 100GE

CFP2

Interface for inputting and outputting 10G LAN/WAN or 100GE optical signals

Optical fiber

Functional Specifications

Table 10-544 Functions and features

Functions and Features

Remarks

Line-Rate capability

Provides two 100GE interfaces for line-rate transmitting and receiving.

Slot information

Occupies one half-width flexible card slot.

Whether interface splitting is supported

Yes

To enable interface splitting, run the port split command to complete interface splitting configuration.

Reliability and availability

Hot swappable.

Restrictions and remarks

The interfaces working in WAN mode can function only as master interfaces.

Technical Specifications

Table 10-545 Interface specifications

Attribute

Description

Optical type supported

100Gbps CFP2 optical module

NOTE:

When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported.

Modules with the BOM number 02312AXE are not supported.

Working mode

Full-duplex

Compliant standard

IEEE 802.3

Frame format

Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Table 10-546 Board specifications

Item

Specification

Dimensions (H x W x D)

37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.)

Typical power consumption

89.0 W

Typical heat dissipation

288.8 BTU/hour

Weight

0.9 kg (1.98 lb)

Ambient temperature

Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059474

Views: 31671

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next