No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(3KTL-10KTL) User Manual

This document describes the SUN2000-3KTL-M0, SUN2000-4KTL-M0, SUN2000-5KTL-M0, SUN2000-6KTL-M0, SUN2000-8KTL-M0, SUN2000-10KTL-M0, and SUN2000-12KTL-M0 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074467, 01074295, 01074300, 01074301, 01074302, 01074306, 01074311, 01074314, 01074315, 01074316, 01074320
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The following requirements should be met if the SUN2000 is not put into use directly:

  • Do not unpack the SUN2000.
  • Keep the storage temperature at –40°C to +70°C and the humidity at 5%–95% RH.
  • The SUN2000 should be stored in a clean and dry place and be protected from dust and water vapor corrosion.
  • A maximum of eight SUN2000s can be stacked. To avoid personal injury or device damage, stack SUN2000s with caution to prevent them from falling over.
  • Periodic inspections are required during the storage. Replace the packing materials if necessary.
  • If the SUN2000 has been long-term stored, inspections and tests should be conducted by qualified personnel before it is put into use.
Updated: 2019-05-31

Document ID: EDOC1100059932

Views: 2840

Downloads: 216

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next