No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(3KTL-10KTL) User Manual

This document describes the SUN2000-3KTL-M0, SUN2000-4KTL-M0, SUN2000-5KTL-M0, SUN2000-6KTL-M0, SUN2000-8KTL-M0, SUN2000-10KTL-M0, and SUN2000-12KTL-M0 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074467, 01074295, 01074300, 01074301, 01074302, 01074306, 01074311, 01074314, 01074315, 01074316, 01074320
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Environment Requirements

Environment Requirements

Basic Requirements

  • The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
  • Do not install the SUN2000 in a place where personnel are easy to come into contact with its enclosure and heat sinks, because these parts are extremely hot during operation.
  • Do not install the SUN2000 in areas with flammable or explosive materials.
  • Do not install the SUN2000 at a place within children's reach.
  • Do not install the SUN2000 outdoors in salt areas because it will be corroded there and may cause fire. A salt area refers to the region within 500 meters from the coast or prone to sea breeze. The regions prone to sea breeze vary depending on weather conditions (such as typhoons and monsoons) or terrains (such as dams and hills).
  • The SUN2000 must be installed in a well-ventilated environment to ensure good heat dissipation.
  • Recommended: Install the SUN2000 in a sheltered place or a place with an awning.

Mounting Structure Requirements

  • The mounting structure where the SUN2000 is installed must be fireproof.
  • Do not install the SUN2000 on flammable building materials.
  • The SUN2000 is heavy. Ensure that the installation surface is solid enough to bear the weight load.
  • In residential areas, do not install the SUN2000 on drywalls or walls made of similar materials which have a weak sound insulation performance because the noise generated by the SUN2000 is noticeable.
Updated: 2019-05-31

Document ID: EDOC1100059932

Views: 2866

Downloads: 217

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next