No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(3KTL-10KTL)-M0 User Manual

This document describes the SUN2000-3KTL-M0, SUN2000-4KTL-M0, SUN2000-5KTL-M0, SUN2000-6KTL-M0, SUN2000-8KTL-M0, SUN2000-10KTL-M0, and SUN2000-12KTL-M0 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074467, 01074295, 01074300, 01074301, 01074302, 01074306, 01074311, 01074314, 01074315, 01074316, 01074320
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appearance

Appearance

Figure 2-4 Appearance

(1) LED indicator

(2) Front panel

(3) Mounting plate

(4) Heat sink

(5) Ventilation valve

(6) Ground screw

(7) AC output port (AC)

(8) Communication port (COM)

(9) Smart Dongle port (GPRS/4G/WLAN)

(10) Battery terminals (BAT+/BAT–) (reserved)

(11) DC input terminals (PV2+/PV2–)

(12) DC input terminals (PV1+/PV1–)

(13) DC switch (DC SWITCH)

  
NOTE:

Two M6 screw holes are reserved on the sides of the enclosure for installing an awning.

Table 2-2 LED indicator description

Category

Status

Meaning

Running indication

LED 1

LED 2

N/A

Steady green

Steady green

The SUN2000 is operating in grid-tied mode.

Blinking green at long intervals (on for 1s and then off for 1s)

Off

The DC is on and the AC is off.

Blinking green at long intervals (on for 1s and then off for 1s)

Blinking green at long intervals (on for 1s and then off for 1s)

The DC is on, the AC is on, and the SUN2000 is not exporting power to the power grid.

Off

Blinking green at long intervals

DC is off and AC is on.

Off

Off

DC and AC are both off..

Blinking red at short intervals (on for 0.2s and then off for 0.2s)

N/A

DC environmental alarm

N/A

Blinking red at short intervals (on for 0.2s and then off for 0.2s)

AC environmental alarm

Steady red

Steady red

Fault

Communication indication

LED 3

N/A

Blinking green at short intervals (on for 0.2s and then off for 0.2s)

Communication is in progress. (When a mobile phone is connected to the SUN2000, the indicator first indicates that the phone is connected to the SUN2000): blinks green at long intervals.)

Blinking green at long intervals (on for 1s and then off for 1s)

The mobile phone is connected to the SUN2000.

Off

There is no communication.

Download
Updated: 2019-07-31

Document ID: EDOC1100059932

Views: 3944

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next