No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess 6.5 F5 Configuration Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Activating a License File

Activating a License File


Before configuring the BIG-IP, you must activate the F5 license.


  1. Log in to the BIG-IP WebUI.

    The following page is displayed.

    Figure 3-2 Inactivated license

  2. Click Activate. The dialog box shown in Figure 3-3 is displayed.

    Figure 3-3 Activating operation (1)

  3. Click Edit on the right of Base Registration Key, as shown in Figure 3-4.

    • Enter the obtained value of Base Registration Key.
    • Select Manual for Activation Method.
    Figure 3-4 Activating operation (2)

  4. Click Next.

    In the dialog box that is displayed, click OK. The dialog box shown in Figure 3-5 is displayed.

    Figure 3-5 Activating operation (3)

  5. Apply for the license file.

    1. Click "Click here to access F5 Licensing Server" in Step 4 to access the license server of the F5.
      • Generally, the F5 load balancing server cannot access the Internet. You need to copy data in the Dossier area to a PC that can access the Internet and then access the F5 licensing server.
      • The address of the F5 License server is:
    2. Copy the generated data in the Dossier area to the interface shown in Figure 3-6.
      Figure 3-6 F5 license server

    3. Click Next to generate license files.

  6. Click Next to activate the license.


    After the license is activated, restart the F5 BIG-IP device or run the bigstart restart command to manually restart the BIG-IP service process.

Updated: 2019-05-30

Document ID: EDOC1100062218

Views: 518

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next