No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess 6.5 F5 Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Synchronizing the Configurations of the Active and Standby Nodes

Synchronizing the Configurations of the Active and Standby Nodes


After you modify the F5 configuration, you need to synchronize the configuration from the active device to the standby device. The synchronization status in the upper left corner of the device changes from IN SYNC to ONLINE(ACTIVE).


  1. Click Changes Pending in the upper left corner.
  2. Select the names of the active and standby devices.
  3. Click Sync to complete the configuration synchronization.

Updated: 2019-05-30

Document ID: EDOC1100062218

Views: 592

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next