No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess 6.5 F5 Configuration Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VLANs

Configuring VLANs

Procedure

  1. In the navigation pane on the left, choose Network > VLANs.

    The VLANs page is displayed.

  2. Configure VLANs.

    1. Click Create...
    2. Set the parameters by referring to Figure 3-9.
      Figure 3-9 Creating a VLAN
    3. Click Finished.

  3. Configure VLANs on the host by referring to Step 1 to Step 2, as shown in Table 3-2.

    Table 3-2 VLAN list

    Host Name

    Name

    Tag

    Interfaces

    Interfaces

    Tagged

    LB01.test.com

    VLAN-EXT

    100

    TRUNK-YEWU*

    Tagged

    VLAN-INT

    200

    TRUNK-YEWU*

    Tagged

    VLAN-HA

    400

    TRUNK-HA*

    UnTagged

    LB02.test.com

    VLAN-EXT

    100

    TRUNK-YEWU*

    Tagged

    VLAN-INT

    200

    TRUNK-YEWU*

    Tagged

    VLAN-HA

    400

    TRUNK-HA*

    UnTagged

  4. After the configuration, the VLAN configuration of the active F5 is displayed, as shown in Table 3-2.

    Figure 3-10 VLAN of the primary F5

Download
Updated: 2019-05-30

Document ID: EDOC1100062218

Views: 568

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next