No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess 6.5 F5 Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Trunks

Configuring Trunks

Procedure

  1. In the navigation pane on the left, choose Network > Trunks.
  2. Click Create in the upper right corner of the page.
  3. Set the related parameters as planned, as shown in Figure 3-8.

    Figure 3-8 Configuration

  1. Click Finished.
  2. Configure the trunks on the active and standby nodes by referring to Step 1 to Step 4.

    Host Name

    Name

    Interface

    LB01.test.com

    TRUNK-TEWU

    2.1~2.2

    TRUNK-HA

    1.1~1.2

    LB02.test.com

    TRUNK-TEWU

    2.1~2.2

    TRUNK-HA

    1.1~1.2

Download
Updated: 2019-05-30

Document ID: EDOC1100062218

Views: 610

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next