No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-38006 Zookeeper Connection Error

ALM-38006 Zookeeper Connection Error

Description

This alarm is generated when the service fails to connect to ZooKeeper. This alarm is automatically cleared when the connection recovers.

Attribute

Alarm ID

Alarm Severity

Alarm Type

38006

Major

Communications alarm

Parameters

Parameter Name

Parameter Description

NameSpace

Indicates the namespace of the service for which the alarm is generated.

ServiceName

Indicates the name of the service for which the alarm is generated.

InstanceName

Indicates the name of the service instance for which the alarm is reported.

Impact on the System

The service is affected.

Possible Causes

The ZooKeeper service is abnormal or has stopped.

Procedure

  1. Use PuTTY to log in to the manage_lb1_ip node.

    The default username is paas, and the default password is QAZ2wsx@123!.

  2. Run the following command and enter the password of the root user to switch to the root user:

    su - root

    Default password: QAZ2wsx@123!

  3. Run the following command to check whether the ZooKeeper status is Running.

    kubectl get pod -n fst-manage | grep dpa-zookeeper

    • If yes, go to Step 4.

    • If no, go to Step 6.

  4. Run the following command to check the listening status of the ZooKeeper service port.

    kubectl get nodes -nfst-manage|grep atps

    • If yes, go to Step 5.

    • If no, go to Step 6.

  5. The alarm is automatically cleared after 1 to 3 minutes. If the alarm persists, go to Step 6.
  6. Contact technical support for assistance.

Alarm Clearing

This alarm is automatically cleared when the service can connect to Zookeeper normally.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 37472

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next