No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-31003 Database instance failover occurred

ALM-31003 Database instance failover occurred


  • This alarm is reported when database instance failover occurs.
  • After the fault is rectified, you need to clear this alarm manually.


Alarm ID

Alarm Severity

Alarm Type



Integrity alarm


Parameter Name

Parameter Description


Name of the database instance that sends the alarm.


Type of the database instance.


IP address of the master database instance.




Alarm name.

Impact on the System

  • If the database replication status is abnormal, data may be lost.
  • In cross-AZ HA scenarios, the master database instance may not be in the preferred site.

Possible Causes

  • The master database instance is abnormal.
  • The master database instance stops running.
  • The node running the master database instance is powered off, or the network is faulty.


  1. Use a browser to log in to the FusionStage OM zone console.

    1. Log in to ManageOne Maintenance Portal.
      • Login address: https://Address for accessing the homepage of ManageOne Maintenance Portal:31943, for example,
      • The default username is admin, and the default password is Huawei12#$.
    2. On the O&M Maps page, click the FusionStage link under Quick Links to go to the FusionStage OM zone console.

  2. Choose Application Operations > Application Operations > Alarm Center > Alarm List from the main menu.
  3. Determine the database instance and node identified in the alarm information.
  4. Choose Application Development > Database > RDBMS from the main menu to query the instance status on the RDBMS page.

Alarm Clearing

This alarm must be manually cleared from the Alarm List page after the fault is rectified.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 35307

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next