No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appendix

Appendix

Logging In to the eBackup Server

Logging In to the Backup Manager or Backup Workflow Server

  1. Log in to the backup manager GUI using a browser.

    Login address: https://IP address corresponding to the Workflow-Management-Float-IP field:8088

    Default account: admin. Default password: Cloud12#$ for installation using HUAWEI CLOUD Stack Deploy, and PXU9@ctuNov17! for manual installation.

  2. On the navigation bar, choose Monitor > Server.

    The IP addresses of the backup manager and backup workflow server are displayed on the Server page.

    • The management plane IP address of the backup manager is Backup Management Plane IP Address corresponding to Backup Manager server (primary).
    • The management plane IP address of the backup workflow server (standby backup manager) is Backup Management Plane IP Address corresponding to Backup Manager server (standby).
    • The management plane IP address of the backup workflow server is Backup Management Plane IP Address corresponding to Backup Workflow Server.

  3. Use PuTTY to log in to the backup manager or backup workflow server using the management IP address obtained in 2.

    Default account: hcp. Default password: PXU9@ctuNov17!.

Logging In to the Backup Server or Backup Proxy

  1. Log in to the backup server GUI using a browser.

    Login address: https://IP address corresponding to the datamover_management_float_ip field:8088

    Default account: admin. Default password: Cloud12#$ for installation using HUAWEI CLOUD Stack Deploy, and PXU9@ctuNov17! for manual installation.

  2. On the navigation bar, choose Monitor > Server.

    The IP addresses of the backup server and backup proxy are displayed on the Server page.

    • The management plane IP address of the backup server is Backup Management Plane IP Address corresponding to Backup server (primary).
    • The management plane IP address of the backup proxy (standby backup server) is Backup Management Plane IP Address corresponding to Backup server (standby).
    • The management plane IP addresses of other backup proxies are Backup Management Plane IP Address corresponding to Backup Proxy.

  3. Use PuTTY to log in to the backup server or backup proxy using the management IP address obtained in 2.

    Default account: hcp. Default password: PXU9@ctuNov17!.

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 34535

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next