No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x10E01A0015 Failed To Delete The FusionStorage Volume

0x10E01A0015 Failed To Delete The FusionStorage Volume

Description

In backup proxy (management plane IP address: [IP_addr]), deleting volume (volume name: [Vol_name], FusionStorage Manager: [DSWare_IP]) fails. Error message ([errMsg]).

Attribute

Alarm ID

Alarm Level

Manually Cleared

0x10E01A0015

Warning

Yes

Parameters

Name

Meaning

IP_addr

Management plane IP address of the backup proxy

DSWare_IP

FusionStorageManager IP address

Vol_name

Volume name

errMsg

Error message

Impact on the System

The backup or restore job fails.

Possible Causes

  • Physical connections are down between the backup proxy and the server where the protected environment resides.
  • The volume to be deleted is not unmounted.

Procedure

  1. Possible cause 1: Physical connections are down between the backup proxy and the server where the protected environment resides.

    1. On the current alarm page, check whether the alarm whose ID is 0x10E0140000 (Failed To Connect To The Protected Environment) or 0x10E0140001 (Failed To Scan A Protected Environment) is reported.
      • If yes, handle the alarm described in 1.a to ensure that the network connection between the backup proxy and production end is in the normal state.
    2. Run the /opt/huawei-data-protection/ebackup/vbstool/vrmVBSTool.sh --op deleteVolume --dsaIp 127.0.0.1 --dswareFloatIP DSWareIP --volName VolumeName command to manually delete the volume. In this command, VolumeName indicates the volume name in the alarm details, and DSWareIP is the IP address of FusionStorage Manager. Then check whether the returned code is 0.
      • If yes, no further action is required.
      • If no, 2.

  2. Possible cause 2: The volume to be deleted is not unmounted.

    1. Run the /usr/bin/vbs_cli -c detachwithip -v VolumeName -i DSWareIP -p 0 command to manually unmount the volume based on the volume information in the alarm. In the command, VolumeName indicates the volume name in the alarm details, and DSWareIP indicates the IP address of FusionStorage Manager. Check whether the return code is 0.
      • If yes, 2.b.
      • If no, contact technical support engineers.
    2. Run the /opt/huawei-data-protection/ebackup/vbstool/vrmVBSTool.sh --op deleteVolume --dsaIp 127.0.0.1 --dswareFloatIP DSWareIP --volName VolumeName command to manually delete the volume. In the command, VolumeName indicates the volume name in the alarm details, and DSWareIP indicates the IP address of FusionStorage Manager. Check whether the return code is 0.
      • If yes, no further action is required.
      • If no, contact technical support engineers.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 35770

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next