No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0002000700000009 The TPS of a Relational Database Exceeds the Threshold

ALM-0002000700000009 The TPS of a Relational Database Exceeds the Threshold

Alarm Description

This alarm is generated when the TPS of a relational database exceeds the threshold specified by the administrator.

The threshold can be manually set on the Monitoring Center > Monitoring Configuration > Performance Threshold Maintenance page.

Alarm Attribute

Alarm ID

Alarm Severity

Alarm Type




There are four severity levels of PerfMonitor threshold-crossing alarms, including critical, major, minor, and warning. The four levels of alarms are handled in the same way.

Alarm Parameters

Resource Type



Relational database


Name of a relational database

Public IP

IP address of a relational database

Impact on the System

System functions may be unavailable.

Possible Causes

The threshold settings are inappropriate.

Handling Procedure

  1. Check the threshold settings of the monitoring indicator.

    1. Choose Monitoring Center > Monitoring Configuration from the main menu. In the navigation pane, choose Performance Threshold Maintenance.
    2. On the Performance Threshold Maintenance page, locate the row that contains the target monitoring indicator.
    3. Click to check whether the threshold settings are appropriate.
      • If yes, go to 3.
      • If no, go to 2.

  2. Modify the alarm threshold policy of the indicator.

    1. Modify the alarm threshold based on the actual indicator data.
    2. Wait for 5 minutes, choose Alarms > Current Alarms from the main menu, and check whether the alarm is cleared.
      • If yes, no further action is required.
      • If no, go to 3.

  3. If services are running properly, contact service O&M personnel to expand or migrate services. In other cases, contact technical support for assistance.

Alarm Clearance

When the fault is rectified, the system will automatically clear the alarm. Manual clearing is not required.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 66603

Downloads: 40

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next