No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-999999996 License Sales Item Reaching or Exceeding the Threshold

ALM-999999996 License Sales Item Reaching or Exceeding the Threshold


This alarm is generated when the system detects that the license usage of sales items has reached or exceeded the threshold; this alarm is automatically cleared when the system detects that the license usage of sales items is below the threshold.


Alarm ID

Alarm Severity

Alarm Type



Security service or mechanism violation





The ID of sales item.

Impact on the System

After the alarm is generated and if it is not handled in a timely manner, you cannot access license resource items and function items when the license usage of sales items reaches the threshold. For example if the number of NEs connected to the FusionStage OM zone has reached the threshold 1000000 of license resources, you cannot connect new NEs.

Possible Causes

A license sales item reaches or exceeds the threshold.


  1. In the current alarm list, view Additional text of the alarm and check whether the usage of a license sales item has reached or exceeded the threshold.
  2. Clear the alarm by applying for a new license file. For details, see 2 and 3 in ALM-999999992 License Will Expire. Then go to 3.
  3. Wait 60 minutes. Check whether the alarm is cleared.

    • If yes, the alarm handling process is complete.
    • If no, collect the information about alarm handling, and contact the technical support personnel.


When the fault is eliminated, the system will auto-clear the alarm. Manual clearing is not required.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 36204

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next