No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-4106 Number of Used Stacks Exceeds the Threshold

ALM-4106 Number of Used Stacks Exceeds the Threshold


This alarm is reported when stack usage exceeds 90% of maximum number of stacks.


Alarm ID

Alarm Severity

Alarm Type



Quality of service alarm


Parameter Name

Parameter Description


Percentage of the number of used stacks to the threshold.


Maximum number of stacks.


Tenant project ID.

Impact on the System


System Actions


Possible Causes

An excessive number of stacks are used.


  1. Log in to FusionStage.

    1. Use a browser to log in to ManageOne Operation Portal (ManageOne Tenant Portal in B2B scenarios) as a VDC administrator or VDC operator.
      Login address:
      • Login address in a non-B2B scenario: https://Address for accessing ManageOne Operation Portal, for example,
      • Login address in the B2B scenario: https://Address for accessing ManageOne Tenant Portal, for example,
    2. Select your region and then project from the drop-down list on the top menu bar.
    3. Choose Console > Application > FusionStage from the main menu.

  2. Choose Application Publishing > Appliaction Orchestration > Stack to delete redundant stacks. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Contact technical support for assistance.

Alarm Clearing

The alarm will be automatically cleared after redundant stacks are deleted.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 48447

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next