No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-9913 Replacing Huawei Default Certificates

ALM-9913 Replacing Huawei Default Certificates


Service OM checks certificates of FusionSphere OpenStack and Service OM Nginx in the system each day by default. This alarm is generated when a Huawei default certificate is used.


Alarm ID

Alarm Severity

Auto Clear







Fault Location Info


Additional Info

unreplaced Cert: indicates that the default certificate list is used.

Impact on the System

Use Huawei default certificates only for site deployment and commissioning. For commercial use, replace the Huawei default certificates with the customer's certificates. If you continue to use the default certificates, the service functions will not be affected, but Huawei assumes no responsibility for security risks that may arise as a consequence of using the default certificates.

Possible Causes

FusionSphere OpenStack and Service OM uses Huawei default certificates.


  1. Replace the FusionSphere-API certificate and ManageOne-PKI certificate by following the instructions provided in "Replacing a Single or Multiple Certificates at a Time on ManageOne" in HUAWEI CLOUD Stack 6.5.0 Security Management Guide.
  2. After all required certificates are replaced, wait for 5 minutes and check whether the alarm is automatically cleared.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Contact technical support for assistance.

Related Information


Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 37601

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next