No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the API Test Script

Installing the API Test Script


You need to install the test script to test the basic SMN functions after SMN is installed.


  • You have obtained the username and password for logging in to DMK.
  • You have uploaded the SMN software package of the required version to DMK.


  1. Log in to the DMK platform.

    The default account is SMNALL, and the default password is Cloud12#$.

  2. In the navigation pane on the left, choose Deploy Guide.

    Figure 14-3 Deploy Guide

  3. On the Service Configuration page, select SMN, the required version, 2-ValidFunction, and the region of the operation.

    Figure 14-4 Service Configuration

  4. Select NO for Host Repository.
  5. Select NO for Blue-Green Deployment.
  6. Click Next to go to the Hosts and User Configuration page.
  7. Select SMN for Team and hermes for Account.
  8. Click beside Configuration File and configure the email address and phone number for receiving test messages. Table 14-1 lists the required parameters.

    Table 14-1 Test phone number and email address



    Example Value



    Specifies the test email account. If you do not conduct the test, retain the default value.


    Specifies the test phone number. If you do not conduct the test, retain the default value.


  9. Click Execute without modifying the hosts configuration file. The gateway commissioning tool is installed in the /opt/hermes directory on the PS01 node by default.
  10. Check the installation task status in the run logs. If the log page is closed, you can find the task by choosing Task Board in the navigation pane on the left.
  11. If you have configured the testEmail and testPhone fields, the specified email and phone number will receive subscription confirmation messages or direct notification messages. If FAIL: 0 is displayed, the test is successful.

    Figure 14-5 Test result

Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 36876

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next