No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI CLOUD Stack 6.5.0 Alarm and Event Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-CloudCapacityMgmt_Base_1005 EIP Usage Rate Exceeding the Threshold

ALM-CloudCapacityMgmt_Base_1005 EIP Usage Rate Exceeding the Threshold

Alarm Description

This alarm is reported when the elastic IP address (EIP) usage of a location (such as a region, resource pool, AZ, or cluster) reaches or exceeds the threshold.

Alarm Attribute

Alarm ID

Alarm Severity

Alarm Type

CloudCapacityMgmt_Base_1005

Warning, Minor, Major, or Critical

QoS

The following table lists the default thresholds for the alarms of each severity.

Capacity Metric

Warning (%)

Minor (%)

Major (%)

Critical (%)

EIP usage rate

70

75

80

90

Alarm Parameters

Name

Meaning

Region

Name of the region corresponding to the alarm

Resource Pool

Name of the resource pool corresponding to the alarm

Function

Function of the EIP corresponding to the alarm

Severity

Severity of the threshold corresponding to the alarm

Threshold

Threshold set by users for reporting the alarm

Current Value

Threshold when the alarm is generated

Impact on System

EIP service provisioning may be affected by resource insufficiency.

Possible Causes

  • The alarm threshold of EIP usage rate is too low.
  • EIP resources at the corresponding location are insufficient.

Handling Procedure

  1. Check the alarm thresholds of EIP usage rate.

    1. Log in to ManageOne Maintenance Portal using a browser.

      URL: https://Address for accessing the homepage of ManageOne Maintenance Portal:31943, for example, https://oc.type.com:31943

      Default account: admin; default password: Huawei12#$

    2. Choose Monitoring Center > Monitoring Configuration from the main menu.
    3. In the navigation pane, choose Capacity Threshold Maintenance.
    4. Check whether the alarm thresholds for EIP usage rate are proper according to the default threshold of each alarm severity.
      • If yes, a few vCPUs can be used, go to 3.
      • If no, go to 2.

  2. Reset the alarm thresholds of EIP usage rate.

    1. Click Modify in the Operation column to modify the thresholds.
    2. Wait for 10 minutes. Choose Alarms > Current Alarms from the main menu. On the displayed page, check whether the alarm is cleared.
      • If yes, no further action is required.
      • If no, after the alarm severity decreases, the alarm still exists and the updating information will be synchronized to Last Occurred on the system. Go to 3.

  3. Contact the administrator to expand the capacity of EIP resources by referring to section "Capacity Expansion for Service Networks" in HUAWEI CLOUD Stack 6.5.0 Capacity Expansion Guide.

Alarm Clearance

After the fault is rectified, the alarm is automatically cleared.

Related Information

None

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1100062365

Views: 34931

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next